Repair Bad memory card


 If your memory card is damaged, we'll show you how to fix your bad memory card today. By adopting these tricks we can bring you back to corrupted storage space for free.
Repair Bad memory card
Repair Bad memory card

Reason for memory card problem

There are two main causes behind the storage device malfunction. One happens to be the firmware karapapat of the storage device and the other is hardware fail. Karapapat storage device is a good reason why it is not so easy to fix the memory card and pen drive that fell on the hardware. It's hard to find out what caused your storage device to be koshis so you should definitely be able to do so in this way. First connect your memory card or pen drive to your commuter

 If the memory card is bad, only the person who needed the Data must be in his or her memory card, and the memory card is damaged. But do you know most of the Memory Card is bad?

 The largest Reason of Memory Card spoiler is your Mobile phone. Yes, your Mobile phone. Often, there are a number of viruses in your Smartphone that can be more than your mobile effect on your memory card, and because of this virus, your memory card gets worse.

 According to a research, it turns out that the big reason for the malfunction of the memory card is Android, because the Android operating system has a virus that comes in very quickly and very easily. So today we are about to tell you how you can recover your memory card just 2 minutes.

Steps to Repair memory card 


 Follow these 10 steps ok

 1. First open the Start menu and search CMD and then right-click and select Open as Administrator option.

 2. Type DiskPart and click Inter at Open CMD.

 3. Then type list disk, and click Inter.

 4. This will display all the hard drive connected to your computer. If you have only one memory card or pen drive connected to your computer, you will be able to show your hard disk in Disk 0 and your memory card or pen drive in Disk 1. If you first notice what number your storage device is showing, go ahead, or inter the wrong number may also be your computer's hard disk format. If your storage device is showing up in Disk 1, type select Disk 1 and click Inter.

 5. Then clean type and the Inter.

 6. Then type the create partition primary and click Inter.

 7. Then type select partition 1 and click Inter.

 8. If you are doing a memory card repair type format FS = FAT32 and if you are repairing pen drive, type format FS = NTFS quick and click Inter. Then wait for the process to complete.

 9. Then actively type and inter.

 10. Finally, type assign and click Inter. Then close CMD.